You can monitor logic programs running in the display unit on the computer.
In the [Watch List] window, you can check the symbol variable ON/OFF state or device values. In the [PID Monitor] window, you can also make adjustments to the PID instruction values while monitoring. These features make it useful for debugging.
The Online Monitor can be run simultaneously with a computer connected via USB and a computer connected via Ethernet (LAN).
AGP-3301S, AGP-3301L, and AGP-3302B do not support the online monitor.
In [Preferences], you can configure the communication settings and monitor the settings with online monitoring.
3.8.5.8 Preferences - Monitor Step Common Settings
When connecting the optional USB transfer cable (CA3-USBCB-01) and the USB data transfer cable (ZC9USCBMB1) or standard USB cable (Type A mini B), logic programs are monitored for the display unit connected using a USB data transfer cable (ZC9USCBMB1).
30.12.1 Online Monitoring Procedures
30.12.2 Monitor/Change the Current Value of Symbol Variables
30.12.3 Adjusting the Setting Values for the PID Instruction