Cut
Cut the object (Parts, Text, Figure). Use [Paste (P)] to place the object back on the screen.
Operating Procedure
You can cut an object by selecting a desired object and click [Cut] in the [Edit] menu.
Copy 
Copies the selected object. Place it on the screen by using the [Paste].
Operating Procedure
You can copy by selecting a desired object and click [Copy] in the [Edit] menu.
Paste
Pastes the copied or cut object onto a screen.
Operating Procedure
You can paste the object you copied or cut by clicking [Paste] in the [Edit] menu.
-
When pasting from one screen to another, you can paste the object to the same position as the other screen.
Duplicate
Copies multiple pictures at a time. When duplicating parts, you can automatically assign the next consecutive address after the source part's address to the destination part.
Delete
Deletes an object.
Operating Procedure
You can delete by selecting the desired object and clicking [Delete (D)] in the [Edit] menu.
Select All
Selects all the objects on the screen.
You can also specify the range to drag multiple objects.
Edit Vertex
You can edit, delete or insert each vertex coordinate of a polyline or polygon.
Group
You can group multiple objects together and treat them as one unit.
Order
When the placed objects are overlapping, you can change the placement order.
Align
Using Align Right, Align Left, Align Center, and so on, you can adjust the positions of multiple objects.
Rotate/Flip
-
Rotate
Rotates the object by 90 degrees.
8.2.11 Rotating Right or Left
-
Bit Invert
Flips the object horizontally or vertically.
8.2.12 Mirroring X-Axis (Vertical)/Y-Axis (Horizontal)
Others
Sets a grid and guidelines to align a part with another one.