Pro-Server EX Ver.1.3 Reference Manual

Thank you for purchasing the Data Management Software Pro-Server EX. This manual describes Pro-Server EX operation procedures and details for features.Please read this and all related manuals carefully in order to use this software properly.

TOP How To Use This Manual Table Of Contents Inquiry
NOTES Trademark Rights Manual Symbols and Terminology Precautions
Precautions
 
This manual describes safety symbols and terms for the correct and safe operation of Pro-Server EX.Read carefully this manual and all related manuals to understand the correct operation and features of Pro-Server EX.
 

UNINTENDED EQUIPMENT OPERATION

  • Touch panel switches should NOT be used to make a switch that could result in human injury or equipment damage. Trouble with the display unit, units, and cables which keep the output ON or OFF could result in a serious accident. An output signal that could result in a serious accident must be equipped with a monitoring circuit such as a limiter. Please design the system so that important operation switches are handled by equipment other than the display unit. This will prevent potential accidents as a result of incorrect output or malfunctions.

  • Touch panel switches should NOT be used for a device's Emergency Stop Switch. The Ministry of Health, Labor and Welfare requires all industrial machinery/systems must be equipped with a mechanical, manually operate emergency stop switch. Also, for other kinds of systems, similar mechanical switches must be provided to ensure safe operation of those systems.

Failure to follow these instructions can result in death, serious injury, or equipment damage.

HEARING DAMAGE

  • Pro-Server EX installation disk is a DVD-ROM. Never play the DVD-ROM on an audio DVD player. Unexpected volume can cause hearing problems or speaker damage.

Failure to follow these instructions can result in injury or equipment damage.

LOSS OF DATA

  • Do not turn off your personal computer's power switch during the execution of a program. The project files could be damaged as a result.

  • Do not change the contents of this product's project files using Text Editor software. The project files could be damaged as a result.

Failure to follow these instructions can result in equipment damage.
 Copyright (C) 2017.02 Digital Electronics Corporation All rights reserved.