38.3.1 Development Process - WinGP

The following figure shows the process flow, from installing WinGP, starting GP-Pro EX, creating screens, and connecting to the device/PLC, to running project files on the IPC or PC/AT compatible machine. Click the link to view the page explaining each process.

The WinGP feature can be used only with user accounts that have Administrator rights.

1. Install WinGP	38.3.2 Installing/Uninstalling WinGP
2. Start GP-Pro EX to create a new project file.	38.3.3 Starting GP-Pro EX to Creating Projects - WinGP
3. Select IPC or PC/AT compatible [Display Type] and [Device/PLC Type].	38.3.3.1 Selecting the Display Unit and Device/PLC - WinGP
4. Create and save a screen in GP-Pro EX.	38.3.3.2 Create/Save - WinGP
5. Start WinGP on the IPC or PC/AT compatible machine and transfer the project file to the IPC or PC/AT compatible unit.	38.3.4 Transfer - WinGP
6. Start and run WinGP.	38.3.5 Starting/Running WinGP Refer to each manufacturer's Device/PLC connection manual regarding the PLC connection cable.
7. Exit WinGP	38.3.6 Exit WinGP