GP-Pro EX Device/PLC Connection Manual
Important: Prior to reading the Device/PLC Connection manual
Be sure to refer to the GP-Pro EX Device/PLC Connection manual when you are connecting a manufacturer's Device/PLC to the Display unit, and using that manufacturer's Connection Manual.
- Preface : for trademark rights, list of units supported, how to read manuals and documentation conventions.
Communication Method: Communication with External Devices (Direct Access method or Memory Link method), LS Area (Direct Access method) and System Area (Memory Link method [When Memory Link drivers and General Ethernet drivers are used]).
Pass-Through Function : for the system requirements, how to use. 
 
note
To make the communication settings correctly, confirm the serial interface specifications of Display unit for [SIO Type].
We cannot guarantee the operation if a communication type that the serial interface does not support is specified.
For details concerning the serial interface specifications, refer to the manual for Display unit.
Device/PLC Connection Manual
Click on any of the links below for the corresponding manufacturer's Device/PLC Connection Manual data.
- Digital Electronics Corporation  
- FANUC LTD.  
- Fuji Electric Corporation  
GE Fanuc Automation Inc.
Hitachi, Ltd.
Hitachi IES Co., Ltd.
- Keyence  
LS Industrial Systems Co., Ltd.
- Matsushita Electric Works, Ltd.  
- MEIDENSHA CORPORATION  
- Mitsubishi Electric Corporation  
- Mitsubishi Heavy Industries, Ltd.
- Omron Corporation  
- Open DeviceNet Vendor Association, Inc.  
- PROFIBUS International  
RKC Instrument Inc.
- Rockwell Automation, Inc. (Allen-Bradley)  
Saia-Burgess Controls Ltd.
- Schneider Electric  
- Sharp Manufacturing Systems Corporation
Shinko Technos Co., Ltd.
- SIEMENS  
TOSHIBA Corporation
TOSHIBA MACHINE CO.,LTD.
- Toyoda Machine Works, Ltd.  
- Yamatake Corporation
- YASKAWA Electric Corporation  
- Yokogawa Electric Corporation/Yokogawa M&C Corporation  

 Copyright (C) 2005-2007 Digital Electronics Corporation All rights reserved.