![]() |
GP-Pro EX Device/PLC Connection Manual |
>>>Printing out the Device/PLC Connection Manual |
The following table lists the Matsushita Electric Works PLCs, and drivers that are supported by GP-Pro EX. For details about how to connect to the Display, click the hyperlink in the Driver column to open the manual PDF (portable document format) file for that driver. |
Series |
CPU |
Link I/F |
Driver |
FP |
FP S |
Tool port on the Control unit |
|
AFPG801 |
|||
AFPG802 |
|||
AFPG803 |
|||
AFPG806 |
|||
FP0 FP1 FP-M |
Tool port on the Control unit |
||
RS232C port on the Control unit |
|||
FP2 FP2SH |
Tool port on the Control unit |
||
RS232C port on the Control unit |
|||
AFP2462 |
|||
AFP2465+(AFP2803, AFP2804, AFP2805) |
|||
FP3 |
Tool port on the Control unit |
||
AFP3462 |
|||
FP-e |
Tool port on the Control unit |
||
AFPE224300 |
|||
AFPE224302 |
|||
AFPE224305 |
|||
AFPE214322 |
|||
AFPE214325 |
|||
FP10SH FP10S |
Tool port on the Control unit |
||
RS232C port on the Control unit |
|||
AFP3462 |