GP-Pro EX Ver.2.00 Reference Manual

GP-Pro EX Ver.2.00 Reference Manual

Thank you for purchasing the GP Screen Editor Software GP-Pro EX. This manual describes GP-Pro EX operation procedures and details for features.Please read this and all related manuals carefully in order to use this software properly.

TOP

How To Use This Manual

Manual Symbols and Terminology

Precautions

Examples of communication settings and cable diagrams for connection devices.

Specifications and installation of the display unit.

Troubleshooting and maintenance

Careful!

When linking to the PDF file from Internet Explorer using Windows XP Service Pack 2 or later, a message displays on the Information Bar.To open the PDF manual, click the message displayed on the Information Bar, and then select [Download File].

Manual Symbols and Terminology

Safety Symbols and Terms

This manual uses the following symbols and terms to identify important information related to the correct and safe operation of GP-Pro EX. The symbols and the descriptions are as follows.

Display	Description
	Indicates a hazardous situation that could result in serious injury or death.
	Indicates a potentially hazardous situation that could result in serious injury or death.
	Indicates a potentially hazardous situation that could result in minor injury or equipment damage.
	Indicates instructions or procedures that must NOT be performed to ensure correct product use.
	Indicates instructions or procedures that MUST be performed to ensure correct product use
	Indicates a potentially damaging action or dangerous situation that could result in abnormal equipment operation or data loss.

General Information Symbols and Terms

This manual uses the following symbols and terms for general information.

Display	Description
	Provides hints on correct product use, or supplementary information.
	Indicates an item with an explanatory footnote.
	Indicates an item's related information.
	Indicates an operation procedure.Follow the numbered steps.

Terminology

This manual uses the following terms and acronyms in its descriptions.

Display	Description
Screen editing software	Indicates GP-Pro Ex.
PLC	Indicates Programmable Logic Controllers.
GP	Indicates GP3000 Series.
LT	Indicates LT3000 Series.
IPC	Indicates PS Series.

This manual describes operations with an emphasis on the GP3000 Series. If you are using different display type, substitute the term GP with your display type, keeping in mind that functions differ between models. To check which functions are supported by your particular display type, see section "Chapter 1 Welcome to GP-Pro EX, 1-3 List of Supported Functions by Device."