FAQ  Are there any restrictions on the Factory Gateway Configuration Tool? 1) Setting protocols of Multi-Link (n:1) type You can neither set nor transfer protocols of Multi-Link (n:1) type from the Factory Gateway Configration Tool. Please set and transfer them from 'GP-Pro EX'. However, it is possible to transfer another protocol to the Factory Gateway in which a protocol of Multi-Link (n:1) type is specified.     2) Password setting You cannot set a possword for the protocol to be transferred with the Factory Gateway Configuration Tool. It is possible to obtain a password for protecting possible protocol overwriting by setting (from the [Transfer] screen, [Settings(S)], and [Password(P)]) and transferring with 'GP-Pro EX'. When you attempt to read password-protected data of the Factory Gateway, a dialog box appears asking the password. By entering the password, you can set up, change and transfer the protocol. The password set in the Factory Gateway will be deleted by transferring the protocol again from the Factory Gateway Configuration Tool.     3) Provider information at protocol change You cannot delete the provider information in the Factory Gateway by changing the transferring the protocol. Please create and transfer a network project file for a new protocol with 'Pro-Studio EX'.

↑Back to page top

--> Returns to the previous page

常见问题 | 个人信息保护 | 关于知识产权 | 使用条款

版权 (C) 2005- Schneider Electric Japan Holdings Ltd.,和普洛菲斯国际贸易(上海)有限公司版权所有，保留所有权利。 沪ICP备05028659号-3