10.6.1 Procedure - Conditionally ON (Comparison)

Create a switch to turn ON the specified bit address by touch when the value of the world address is over 64.

  1. On the [Parts (P)] menu, point to [Switch Lamp], and select [Bit Switch (B)], or click to place a switch on the screen.

  2. Double-click the placed Switch part. The following dialog box appears.

  3. In [Select Shape], select the Switch shape.

  4. Set up the [Bit Address] that you want to operate when you touch the switch. (For example: M100)

  5. From [Bit Action] choose [Comparison].

  6. Set the Word Address (D102) to compare in [Comparison Word Address], select ">" for the [Comparison Condition], and input "64" for the [Constant].

  7. As needed, set the color and display text on the [Color] tab and [Label] tab, and click [OK].

    • Depending on the shape, you may not be able to change the color.

    • When you select a switch and press the [F2] key, you can directly edit the text on the label. When [Text Table] is selected, you can change the current Text Table.