37.9.1 Operation - Displaying Alarm information on the Web Server

Log in to the Web Server and select [Alarm Information] in the [Welcome] screen.
- For information on setting up and connecting to the Web Server, see the following.
  37.8 Displaying and Editing Addresses Via Web Server
When the following screen appears, in the [Block Number] field select the alarm block number to display, and in the [Record Format] field select the alarm display mode.[Refresh] command lists the current alarm information as follows.
(For example, [Block Number] = Block 1, [Record Format] = History).
- Select the [Refresh] command again to get the latest alarm information.
When you complete reviewing the alarm information, [Log off] to disconnect.

In order to display the data values when Alarms are triggered, on the [Common Settings (R)] menu, click [Alarm (A)] and then select the [Read Data From Each Alarm] check box on the [Alarm] screen to specify the address where you want to obtain values. For more details, please refer to the following.
20.12.1.2 Alarm Settings (Block 1) - Bit Monitoring or 20.12.1.3 Alarm Settings (Block 1) - Word Monitoring