Deletes all data in the display unit's internal memory.
Be careful. After you touch [Start], you cannot stop initialization.
Do not turn OFF the power switch while initialization is in progress.
Also clears data in backup memory (SRAM). When using the GP-4100 series (excluding GP-411*T3), virtual backup memory data is deleted as well.
Initialization does not erase the SYSTEM SET UP, the SIO protocol, or the internal clock settings.
All data retained by the logic program is also erased.
The time required for Initialization is between 10 and 20 seconds.
This item does not display when using the IPC Series or SP5000 Series Open Box.
Please input the system password and press the Start switch.
Touch the system password entry field and enter the system password. If the system password has not been set, enter the standard password [1101].
Start
Starts initialization of internal memory.