For information about errors at installation, the cause of errors and their solution, please refer to the following.
T.6.1 Errors displayed during installation
You must install Pro-Server EX version 1.10 or Pro-Server with Pro-Studio first before you can install WinGP on an iPC or PC/AT compatible machine. You can uninstall the conflicting application, or update Pro-Server EX to version 1.10 or later.
When WinGP is installed on an IPC or PC/AT compatible machine and you install Pro-Server EX (version 1.10 or later), the WinGP SDK is removed. When you want both WinGP and Pro-Server EX (version 1.10 or later) to reside on the same machine, first install Pro-Server EX. When you install WinGP after installing Pro-Server EX, the WinGP SDK is not installed. However, you can use applications that use the WinGP SDK by setting up the network nodes on Pro-Server EX.
If the path has more than 200 single-byte characters in the folder where WinGP is installed, when starting simulation an error appears (Cannot start because the installation folder exceeds 200 characters) and it will not operate properly. Use a path less than 200 single-byte characters and reinstall WinGP.
If you install WinGP on an OS that does not support it, an error message appears and the installation cannot be completed.
To install, log on with an account with Windows Administrator authority.
You cannot install WinGP more than once, even to another folder. to uninstall, insert the installation CD in the IPC on which WinGP is installed.
WinGP does not allow for recovery installation. to recover, uninstall and then reinstall WinGP.
If downloading WinGP to a PC/AT compatible machine, please connect the USB key after installation is complete. If the USB key is connected before installation, the operating system starts the USB driver wizard automatically. If the wizard starts, make sure you cancel and exit the wizard.
After installation, please restart before using WinGP and log in with an account with Administrator rights. The WinGP will not operate properly without restarting the IPC.