This section describes the menu items that are displayed in the second page of the system menu.
Volume
Adjust the volume of the external speaker connected to the AUX terminal. This switch is displayed only when the model supports sound output (AUX output).
IP Address
Touch this switch to check the IP address designated for the display unit. This switch is displayed only when the model supports Ethernet.
This switch is displayed only when the VM unit is used. Touching this switch displays the menu to move to the [Position], [Screen], [Color], and [Default] setting screens.
Adjust the horizontal and vertical positions of the screen. Available ranges are between -128 and 128 for the horizontal position, and between -16 and 16 for the vertical position.
Adjust the clock and phase. Available ranges are between -128 and 128 for the clock and between 0 and 63 for the phase.
Set the level for red, green, and blue or perform fine tuning. The levels can be set within the range of 0 to 3, and fine tuning is available within the range of 0 to 255.
[EXECUTE]: Touch the button to reset the [Position], [Screen], and [Color] settings to their initial values.