Clears all the data (virtual backup memory data when using the GP-4100 series) stored in the display unit's backup memory (SRAM).
[Start]. Please be careful as you cannot stop initialization after it's started.
Do not turn OFF the power switch while initialization is in progress.
Backup SRAM Initialization will not erase the SYSTEM SET UP, the communication protocol, internal clock settings, or logic program data.
Please input the system password and press the Start switch.
Touch the system password entry field and enter the system password. If you have not specified a system password, enter "1101" (standard password).
Start
Starts initialization of the backup memory (SRAM).