T.6.7 使用数据穿越功能时显示的错误

错误消息

描述

Timeout error is occurred.

当用数据穿越配置工具中注册的设置进行连接时发生超时。检查是否连接了GP。

Failed to open port of Virtual Com Driver.

当用数据穿越配置工具中注册的设置进行连接时未能打开虚拟COM端口。检查应用程序(如梯形图软件)设置的端口号是否相同。

The node is already connected.

连接到已经用数据穿越功能进行连接的GP。用数据穿越配置工具检查数据穿越功能的连接状态。

Virtual COM port driver is not properly installed.Please install Virtual COM port driver

未正确安装虚拟串口驱动程序。请删除虚拟串口驱动程序后再重新安装。

Port number of virtual COM duplicated.Please change virtual port number of virtual Com in the device manager

虚拟串口号重复。请用设备管理器更改相应的串口号。