 |
| Software Update Module / Add-on Software |
|
使用我们的下载服务之前，请阅读以下使用条款。下载任何软件都表明您已同意这些条款。
使用条款
- Pro-face对此下载服务所提供的所有文件拥有知识产权。
- 您仅能以非赢利性目的、在您所属公司内部下载这些文件供个人使用。
- 严禁复制、公布、再出版、转让、出借、反编译、修改、伪造或再利用Pro-face为此下载服务提供的任何文件。
- 此下载服务通过互联网提供。在使用该项服务前，请明确Pro-face对下载时的状况、可访问性和与此项服务相关的使用情况不做任何担保。
- 使用此项服务的风险由您个人承担。
- 如果下载文件上有任何附加条款，如服务使用条款等，请务必遵守此类条款。
注意：
- 下载方法1：鼠标右键点击下载链接，选择“目标另存为...”。请不要使用下载软件进行下载。
- 下载方法2：部分文件通过百度云盘下载(需登录百度云盘)，请按下载链接上红色字体的指示操作。
- 删除文件或对文件内容、规格等做出修改时恕不另行通知。
- 下载文件后，请确认其大小与显示的下载文件大小完全相符。
- 如果不相符，请勿解压(执行)此文件，而应将其删除，然后再重新下载一次。
|
Note:
This program should be run on a PC on which Pro-Server with Pro-Studio Ver. 4.13 has already been installed.
If your version of Pro-Server with Pro-Studio is earlier than Ver. 4.13, please update it with the following module. |
| - |
Pro-Server with Pro-Studio Ver. 4.13 |
Note in Setting
the Program:
When you install Pro-Server with Pro-Studio with the setup type "Custom", please be aware of the following. |
| - |
If the action functions are added from the master CD after Pro-Server with Pro-Studio is updated to Ver. 4.14 with this module, the action functions will not be updated to Ver. 4.14.
In this case, please uninstall Pro-Server with Pro-Studio, and reinstall Pro-Server with Pro-Studio with your desired action functions, and then run this upgrade package to use the added actions with Pro-Server with Pro-Studio Ver. 4.14. |
|
| File Name |
Pro-ServerV414.exe |
| File Size |
834KB |
| Applicable Version |
Pro-Server with Pro-Studio Ver. 4.13 |
| Description |
Module for updating Pro-Server with Pro-Studio to Ver. 4.14 |
| Features |
| 1. The following functions have been improved. |
| - |
In "Import C-Package Symbol", when a project in which GP type has been set to the GLC series in GP-PRO/PB III C-Package is specified, it may impossible to import all symbols. |
| - |
When selecting a CSV file in the "Automatic Download of GP Filing Data" dialog, if the CSV file was created as unchecked zero suppress and saved as .csv in an "Automatic Upload of GP Filing Data" action, an error message appeared. |
|
|
|
| Module Installation (This
is a self-extracting file) |
| 1. |
Confirm that Pro-Server with Pro-Studio Ver. 4.13 is installed on your PC. |
| 2. |
Since this software update module only overwrites the modified sections of the program (a portion of the program), do not uninstall Pro-Server with Pro-Studio from your PC. |
| 3. |
Be sure to quit Pro-Server with Pro-Studio before installing this module. |
|
| |
| Installation Procedure |
| 1. |
Click on the link "Pro-ServerV414.exe" in the box above to download the file to the desired folder. |
| 2. |
After the download is completed, double-click on the "Pro-ServerV414.exe" file to start installation. |
| 3. |
Follow the installer program's directions. |
| 4. |
When installation is completed normally, " Setup completed." is displayed.
If there are any problems and installation can not be completed, contact our company. |
| 5. |
Start up Pro-Studio.
Select [Help] - [About(Pro-Studio)] in menu of Pro-Studio.
Check that the version number displayed in the dialog box is Ver. 4.14.
* The version number displayed in the Windows [Control Panel | Application Add/Delete] dialog box remains unchanged. |
|
|
| Important: |
| 1) |
When a Project file has been edited as in the following example, symbols can NOT be used on the GP unit's screen after Pro-Studio's [Import C-Package Symbol] has been performed: |
|
| - |
After all GP-PRO/PBIII C-Package special protocol symbols have been deleted, the same symbols are again added to the project and the project file saved without changing/updating the screen used. |
|
|
Solution: After changing a screen's symbol data, be sure to make a change in the actual screen data before saving. This will allow the Import feature to be used.
|
| 2) |
When the network project Provider data size is from 59500 to 61440 bytes:
Sending Provider information to the GP unit results in a "size overflow" error, even though no error occurs when the Provider data is checked.
Solution: The file size at transfer time is the true maximum file size. Therefore, tune the Provider information until this error stops.
|
| 3) |
| - |
"Write Data to Excel book" action. |
| - |
"Upload of GP Log Data" action (for template file selection) |
| - |
"Automatic Upload of GP Filing Data" action (for saving destination selection) |
| - |
"Automatic Download of GP Filing Data" action (for download file selection) |
|
|
If the media used in the drive you have selected using any of the above feature's drive selection combo boxes does not exist (Ex. selecting a floppy disk drive when no floppy disk is inserted) this will, display a dialog box, and the desired action cannot be registered. Also, the data setup dialog box will not be displayed.
Solution: Restart Pro-Server. |
|
| Last Updated: June.14, 2004 |
|
沪ICP备05028659号-3