 |
| Software Update Module / Add-on Software |
|
使用我们的下载服务之前，请阅读以下使用条款。下载任何软件都表明您已同意这些条款。
使用条款
- Pro-face对此下载服务所提供的所有文件拥有知识产权。
- 您仅能以非赢利性目的、在您所属公司内部下载这些文件供个人使用。
- 严禁复制、公布、再出版、转让、出借、反编译、修改、伪造或再利用Pro-face为此下载服务提供的任何文件。
- 此下载服务通过互联网提供。在使用该项服务前，请明确Pro-face对下载时的状况、可访问性和与此项服务相关的使用情况不做任何担保。
- 使用此项服务的风险由您个人承担。
- 如果下载文件上有任何附加条款，如服务使用条款等，请务必遵守此类条款。
注意：
- 下载方法1：鼠标右键点击下载链接，选择“目标另存为...”。请不要使用下载软件进行下载。
- 下载方法2：部分文件通过百度云盘下载(需登录百度云盘)，请按下载链接上红色字体的指示操作。
- 删除文件或对文件内容、规格等做出修改时恕不另行通知。
- 下载文件后，请确认其大小与显示的下载文件大小完全相符。
- 如果不相符，请勿解压(执行)此文件，而应将其删除，然后再重新下载一次。
|
LT Editor Version
Check
Confirm your software version using the following steps:
[Project Manager] --> [Help] --> [About]
|
LT Unit System
Version Check
<Type A, B, B+ Units>
Confirm your hardware version using the following steps:
(After calling up the OFFLINE mode menu bar)
[OFFLINE] --> [INITIALIZE] --> [PLC SETUP] --> [PLC SETUP], After this, "Ver.1.45" should
appear in the left lower corner of the screen.
<Type C Unit>
Confirm your hardware version using the following steps:
(After calling up the OFFLINE mode menu bar)
[OFFLINE] --> [INITIALIZE] --> [PLC SETUP] --> [PLC SETUP]
With Type C units the version displayed will depend on the PLC selected.
|
| Mitsubishi Electric
FREQROL Series |
Ver.1.44 |
Yokogawa M&C
FACTORY ACE 1:1 |
Ver.1.50 |
| Fuji Electric
Inverter |
Ver.1.42 |
Yokogawa M&C
FACTORY ACE 1:n |
Ver.1.50 |
| RKC CB/SR-Mini
Series |
Ver.1.42 |
Memorylink SIO
Type |
Ver.1.46 |
|
| |
| File
Name |
LogiTouchV104.exe |
| File
Size |
18,248KB |
| Table
of Contents |
LT
Editor Ver. 1.04 Modifications |
| Version |
LT
Editor Ver. 1.0 , Ver. 1.02 , Ver.
1.03 |
| Description |
| The
following issues have been corrected. |
| - |
When used continuously
for long periods of time, LT
Series Type A, Type B, Type B+,
model's screens will freeze(lock)
and all touch keys will not work. |
| - |
When using the
portrait display type the bitmap
conversion may not be correct. |
| - |
The UT150 Series
indicating controller supports
Yokogawa FACTORY ACE 1:1 and
1:n communication. |
| - |
Updates the latest
versions of RKC Instrument's
CB/SR-Mini Series, Mitsubishi
Electric's FREQROL Series, Fuji
Electric's inverters, and Memorylink
SIO Type. |
|
|
|
|
| |
| Extracting (Opening) the file (This
is a self-extracting file.) |
| 1. |
Click on the file "LogiTouchV104.exe" in
the above box to download data to a desired
folder. |
| 2. |
After downloading is finished,
double-click the "LogiTouchV104.exe" file
to open it. |
| 3. |
Follow the instructions given
by the installation program.
If you have problems downloading any of the above files,please contact
your local Pro-face distributor. |
|
Update History:
[Ver. 1.03 Update Contents] Last updated
June.28, 2001 |
| 1. The following
issues have been corrected. |
| - |
When copying and pasting Filing
Data from the Filing List, the verification
of the internal memory capacity may not be
correct. |
| - |
After performing the CSV import
of the Filing Data, the control display may
become strange. |
| - |
When adding alarms and an
error occurred, the English error messages
may not be displayed. |
| - |
Nested D-Script functions
may not perform within D-Scripts and Global
D-Scripts. |
| - |
When "Preparing" the
project within the Transfer feature, an undefined
address error may occur. |
| - |
When printing D-Scripts or
Global D-Scripts to an RTF file, the program
might unexpectedly shut down. |
| - |
After importing alarm's CSV
data that was modified in Excel, the contents
of the address might change. |
| - |
When rotating grouped drawing
objects, all objects might be shifted by
1 dot. |
| - |
If using a symbol for the
D-Script's trigger, and then performing the
Address Conversion feature, the symbol might
be converted to its address. |
| - |
For Address Conversion of
D-Script, the inputted address with fewer
zeros may not be correctly converted.
ex.) When
using OMRON THERMAC NEO Series, [b:01/C0001000]
can be converted, but [b:01/C001000] cannot
be. |
| - |
For the Cross Reference of
D-Script, the inputted address with fewer
zeros may not be shown correctly.
ex.) When
using OMRON THERMAC NEO Series, [b:01/C0001000]
and [b:01/C001000] are displayed as different
addresses. |
| - |
Cross Reference of D-Script
may not be able to be printed. |
| - |
GLC symbols that was set in "D-Script" will
be shown as #C# when using the "Global
Cross Reference List" feature. |
| - |
"D-Script" functions
that was copied from another project via
the "Screen Copy" feature, and
then transferred to a GP, cannot be uploaded. |
| - |
When using the system variable
#Screen, screen change may not function properly. |
| - |
When importing symbols, the "confirm
to overwrite" dialog will be hidden
in the back. |
| - |
When uploading, even when
overwriting the currently opened project,
the logic part will not be saved. |
| - |
When changing only the value
of the timer, counter, scan time, or WDT
(watch dog timer) and transferring the project
from the Project Manager, the value that
was changed might not be reflected. |
2. Support for the following items/features were added. |
| - |
LT Series Type B+ |
| - |
32-point input/output (Sink
Type) [ FN-XY32SK41 ] |
| - |
32-point input/output (Source
Type) [ FN-XY32SC41 ]
*FN-XY32SC41
support is due soon. |
| - |
Single-axis Positioning unit
[ FN-PC10SK ] |
| - |
I/O variable import/export |
|
[Ver. 1.02 Update Contents] Last
updated November 16, 2001 |
| The following
issues have been corrected. |
| - |
Logic program file name
change to noname
With a newly created control project file, after changing to the Monitoring
Mode, edited logic programs could not be saved. |
| - |
Incorrect text replacement
When having used the "Replace" function to change text strings,
the texts could not have been replaced correctly. |
| - |
Save Data? message with
an unmodified logic program file
Prior to changing to Monitoring Mode, data save confirmation has appeared
for unmodified logic programs. |
| - |
Changing to Monitoring
Mode causes data upload
When having switched to Monitoring Mode, upload of the logic program has
been performed automatically. |
| - |
Data transfer error
Depending on a type of PC used, when the data transfer was performed from
the Program Manager, an error for transferring logic program data may
has occurred. |
|
| Last Updated : August.19.2002 |
|
沪ICP备05028659号-3