Otasuke Pro! Technical Resource

微信扫一扫
在线技术支持

微信扫一扫
访问视频号

Software Update Module / Add-on Software

> Pro-Designer Update >Pro-Designer Ver. 4.0 (Update to Ver. 4.0.3) Update Module

使用我们的下载服务之前，请阅读以下使用条款。下载任何软件都表明您已同意这些条款。

使用条款

Pro-face对此下载服务所提供的所有文件拥有知识产权。
您仅能以非赢利性目的、在您所属公司内部下载这些文件供个人使用。
严禁复制、公布、再出版、转让、出借、反编译、修改、伪造或再利用Pro-face为此下载服务提供的任何文件。
此下载服务通过互联网提供。在使用该项服务前，请明确Pro-face对下载时的状况、可访问性和与此项服务相关的使用情况不做任何担保。
使用此项服务的风险由您个人承担。
如果下载文件上有任何附加条款，如服务使用条款等，请务必遵守此类条款。

注意：

下载方法1：鼠标右键点击下载链接，选择“目标另存为...”。请不要使用下载软件进行下载。

下载方法2：部分文件通过百度云盘下载(需登录百度云盘)，请按下载链接上红色字体的指示操作。

删除文件或对文件内容、规格等做出修改时恕不另行通知。
下载文件后，请确认其大小与显示的下载文件大小完全相符。
如果不相符，请勿解压(执行)此文件，而应将其删除，然后再重新下载一次。

下载

[Caution: Back up project data before upgrading]
When Projects created in the current version of Pro-Designer are opened after an update has been installed, the project data is also updated and therefore cannot be re-opened in the version it was created in.
Before installing the update, use the File menu's "Export Project"
option to back up the project's latest data for future use with the current version.

Confirm your software version using the following steps:
[Pro Frame] --> [Help] --> [About...]

File Name	ProDesignerV403.exe
Size	40,619KB
Update Version	Pro-Designer Ver. 4.0.3
Original Version	Pro-Designer Ver. 4.0.0 , Ver. 4.0.0b , Ver. 4.0.1 , Ver. 4.0.2
Update Description	Click here to view these items.

Update Procedure
The update procedure varies depending on the target machine type.
Perform the following procedure to update your Pro-Designer and Runtime to Ver. 4.0.3.


<In the case of PC/AT (Pro-Designer and Runtime are in the same PC) >
1.	Save the above file to the PC.
2.	Start the saved file (ProDesignerV403.exe).
3.	Transfer (download) the project file (your drawing data) to the same PC (local).

<In the case of PC/AT (Pro-Designer and Runtime are in different PCs) >
1.	Save the above file to each PC.
2.	Start the saved file (ProDesignerV403.exe) on each PC.
3.	Transfer (download) the project file (your drawing data) to the PC Runtime is in.

<In the case of GP Series and PS-G Series (using serial/Ethernet connection) >
1.	Save the above file to the PC the project file (your drawing data) was created on.
2.	Start the saved file (ProDesignerV403.exe).
3.	Start the Runtime Installer ([Start]-->[Program]-->[Pro-face]-->[Pro-Series]-->[Tools]-->[Runtime Installer]) to transfer (install) Runtime Ver. 4.0.3 into the target machine.
4.	Transfer (download) the project file (your drawing data) to the target machine.

<In the case of GP Series and PS-G Series (using file system) >
1.	Save the above file to the PC the project file (your drawing data) was created on.
2.	Start the saved file (ProDesignerV403.exe).
3.	Transfer (download) Runtime and the project file (your drawing data) to the CF card (file system).
4.	Insert the CF card into the target machine to start Runtime.

Opening the file: (This is a self-extracting file.) Prior to installing the update module, close all your personal computer applications, including any resident program such as a virus detection program, etc.
1.	Click on the above File Name to download data to the folder you wish to use.
2.	After the download is finished, double-click on the file to open it.
3.	Follow the Installer's instructions to install the update file.

Notes about Installation

After installing this update module, your software version will be 4.0.3.
Please see the above "readme.txt" file about the Ver. 4.0.3 update information because even if your software is updated, Ver. 4.0.3's "readme.txt" file will not be installed.

Last Updated : April.9.2004

| Return to Top |

| Back | HOME |

常见问题 | 个人信息保护 | 关于知识产权 | 使用条款