|
Software Update Module / Add-on Software |
使用我们的下载服务之前,请阅读以下使用条款。下载任何软件都表明您已同意这些条款。
使用条款
- Pro-face对此下载服务所提供的所有文件拥有知识产权。
- 您仅能以非赢利性目的、在您所属公司内部下载这些文件供个人使用。
- 严禁复制、公布、再出版、转让、出借、反编译、修改、伪造或再利用Pro-face为此下载服务提供的任何文件。
- 此下载服务通过互联网提供。在使用该项服务前,请明确Pro-face对下载时的状况、可访问性和与此项服务相关的使用情况不做任何担保。
- 使用此项服务的风险由您个人承担。
- 如果下载文件上有任何附加条款,如服务使用条款等,请务必遵守此类条款。
注意:
- 下载方法1:鼠标右键点击下载链接,选择“目标另存为...”。请不要使用下载软件进行下载。
- 下载方法2:部分文件通过百度云盘下载(需登录百度云盘),请按下载链接上红色字体的指示操作。
- 删除文件或对文件内容、规格等做出修改时恕不另行通知。
- 下载文件后,请确认其大小与显示的下载文件大小完全相符。
- 如果不相符,请勿解压(执行)此文件,而应将其删除,然后再重新下载一次。
|
NOTE:
To use the GLC Control System Ver.4.3 functions, the following file shoud, also, be updated.
- GP-PRO/PB III C-Package02 Service Pack 2
Confirm your software version using the following steps:
[OFFLINE] --> [INITIALIZE] --> [PLC SETUP] --> [CTRL SETTING] --> [CONTROLLER DIAGNOSIS] --> [CONTROLLER INFORMATION]
Version information will be shown in the [CTRL] area.
|
File Name |
GLC_Ver433.exe |
Size |
1,444KB |
Update Version |
GLC Control System(GLC2400T/GLC2600T) Version 4.33 |
Original Version |
GLC Control System Version 4.3 |
Update Items |
The following issues were resolved. |
|
- |
The GlC ladder monitor window will be hung up when clicking the GLC Ladder Monitor Switch button(END button) or the Rung Number Display button during the message showing the search is in progress on the GLC ladder monitor. |
- |
Unable to display the true variable name and value when using the timer/counter variable in a parentheses speicified with array or X/B/W on the GLC ladder. |
*For information about GLC Control System Ver.4.3 Update File, see readmee.txt |
Supplement:
*1 Your PC and any data on the hard disk are not affected by the above error. |
|
|
|
|
|
When setting up your GLC again:
After the update file is installed, use the following steps to setup your GLC unit again. |
1. |
Select the "Transfer Setting" check box in the "Control Data" tab, and set "Automatically Send Changed Screens" in the "Transfer Method" tab. |
2. |
Send the project to the GLC. |
Opening the file: (This is a self-opening file.) |
1. |
Click on the above File Name to download data to the folder you wish to use. |
2. |
After the download is finished, double-click on the file to open it. |
3. |
Follow the Installer's instructions to install the update file. |
|
Last Updated : Nov.18,2003 |
|