|
PS
Series |
使用我们的下载服务之前,请阅读以下使用条款。下载任何软件都表明您已同意这些条款。
使用条款
- Pro-face对此下载服务所提供的所有文件拥有知识产权。
- 您仅能以非赢利性目的、在您所属公司内部下载这些文件供个人使用。
- 严禁复制、公布、再出版、转让、出借、反编译、修改、伪造或再利用Pro-face为此下载服务提供的任何文件。
- 此下载服务通过互联网提供。在使用该项服务前,请明确Pro-face对下载时的状况、可访问性和与此项服务相关的使用情况不做任何担保。
- 使用此项服务的风险由您个人承担。
- 如果下载文件上有任何附加条款,如服务使用条款等,请务必遵守此类条款。
注意:
- 下载方法1:鼠标右键点击下载链接,选择“目标另存为...”。请不要使用下载软件进行下载。
- 下载方法2:部分文件通过百度云盘下载(需登录百度云盘),请按下载链接上红色字体的指示操作。
- 删除文件或对文件内容、规格等做出修改时恕不另行通知。
- 下载文件后,请确认其大小与显示的下载文件大小完全相符。
- 如果不相符,请勿解压(执行)此文件,而应将其删除,然后再重新下载一次。
|
Note:
- |
To use this update, the Enhanced Write Filter (hereafter described as "EWF") must be set to "Disable".
After disabling the Write Filter with the EWFSettingTool, please restart your system before installing. |
- |
Please close all applications before installing, including KeyClick. |
|
File
Name |
XPESP2Update_060712.exe |
File
Size |
1,660KB |
Correspondence Series |
XP Embedded Service Pack2 |
Supported Models |
- PS365XA-XPE1G-J1-BLD
- PS365XA-XPE1G-M1-BLD |
Update
Description |
1. |
The following issues were corrected: |
|
- |
Write filter function does not operate normally when a Proface CF card with
the "HB28B***C8*" marking on the lower right of the back is connected with PCMCIA I/F during SID creation (= "Change Security ID" is selected in "EWFSettingTool.exe"). |
|
|
|
|
Phenomenon
When starting "EWFSettingTool.exe", the following display appears.
|
|
2. |
Limitations |
- |
Before update, confirm that the Writer Filter function is disabled. (" EWF Disable " must be selected in "EWFSettingTool.exe ".) |
- |
This update module cannot be uninstalled. |
|
*<Writer Filter Setting Procedure>
Refer to " 3.1 Write Filter Settings Procedures " of the manual on the following site |
3. |
When the error occurs before updating, take the steps as shown below:
* For this solution, you do not have to remove the CF card in PCMCIA I/F. |
|
1. |
Select [Start] R [Run] in this order. |
2. |
Enter "Rundll32 ewfdll.dll ConfigureEwf" and click [OK]. |
|
* When typing, upper case letters and lower case letters must be discriminated. |
3. |
Restart the panel computer. |
4. |
After the restart, Write Filter function is disabled. Install the update module. |
|
|
|
|
|
|
Installation (This file is self-extracting.) |
1. |
Download " XPESP2Update_060712.exe "
Click on " XPESP2Update_060712.exe "and download the data to the desired folder on your PC. |
2. |
Decompress the downloaded " XPESP2Update_060712.exe " file by double-clicking it. |
3. |
On the PS365XA/PLX930 unit where the Write Filter function is disabled (= " EWF Disable " is selected in " EWFSettingTool.exe "), double-click " XPESP2Update_060712.exe ". |
4. |
Start the installation process according to the installer. |
5. |
After the completion of installation, EWF switched to "Enable" when needed, and restart your system. |
|
|
Last Updated : July 11, 2006 |
|