|
PRotocol
Download |
|
|
> PLCs > Allen
Bradley SLC500 Series, Mitsubishi Melsec Q Series(CPU) Protocol
Update Modules |
|
使用我们的下载服务之前,请阅读以下使用条款。下载任何软件都表明您已同意这些条款。
使用条款
- Pro-face对此下载服务所提供的所有文件拥有知识产权。
- 您仅能以非赢利性目的、在您所属公司内部下载这些文件供个人使用。
- 严禁复制、公布、再出版、转让、出借、反编译、修改、伪造或再利用Pro-face为此下载服务提供的任何文件。
- 此下载服务通过互联网提供。在使用该项服务前,请明确Pro-face对下载时的状况、可访问性和与此项服务相关的使用情况不做任何担保。
- 使用此项服务的风险由您个人承担。
- 如果下载文件上有任何附加条款,如服务使用条款等,请务必遵守此类条款。
注意:
- 下载方法1:鼠标右键点击下载链接,选择“目标另存为...”。请不要使用下载软件进行下载。
- 下载方法2:部分文件通过百度云盘下载(需登录百度云盘),请按下载链接上红色字体的指示操作。
- 删除文件或对文件内容、规格等做出修改时恕不另行通知。
- 下载文件后,请确认其大小与显示的下载文件大小完全相符。
- 如果不相符,请勿解压(执行)此文件,而应将其删除,然后再重新下载一次。
|
File
Name |
DriverUpdateKit1.exe |
File
Size |
1,345KB |
Protocol |
Series |
Driver
(Version) |
Models |
Allen
Bradley
SLC500 Series |
SLC500.EPN
(Ver. 1.45) |
GP77R
Series
GP2000 Series |
SLC500.HPN
(Ver. 1.45) |
GP377
Series |
SLC500.APN
(Ver. 1.45) |
GP70
Series |
Mitsubishi
Melsec Q Series (CPU) |
MEL_QP.EPN
(Ver. 1.44) |
GP77R
Series
GP2000 Series |
MEL_QP.HPN
(Ver. 1.44) |
GP377
Series |
MEL_QP.APN
(Ver. 3.43) |
GP70
Series |
Update
Description |
-
Allen Bradley SLC500 Series
|
|
Changes
on Ver. 1.45 (GP77R Series/GP2000
Series/GP377 Series), Ver. 3.45
(GP70 Series) |
1. |
When
writing data to the PLC from GP/GLC,
200ms delay time is reduced to
20ms. |
|
-
Mitsubishi Melsec Q Series (CPU)
|
|
Changes
on Ver. 1.44 (GP77R Series/GP2000
Series/GP377 Series), Ver. 3.43
(GP70 Series) |
1. |
A
communication error with PLC COM.ERROR
(02:FC) may occur. |
2. |
When
using the built-in 2-Port function
between and GP with a PC with 'GX
Developer Ver. 6.0 or Ver. 7.0',
errors may occur. |
|
|
Installation (The downloaded file is self-extracting.) |
1. |
Prior
To Installation
- Be sure to close all application's on the PC. |
2. |
Click
on the above file name to download the
data to a folder you wish to store. |
3. |
After
the download to your PC finishes, double-click
on the file's icon to start the installer
program. After the installer starts, simply
follow the instructions given on each screen.
This program installs the new GP/GLC driver
files into the GP-PRO/PB III for Windows "PROTOCOL" folder. |
4. |
To
send new driver data to the GP/GLC:
Use the GP-PRO/PB III "Transfer" area's "Force Setup" feature
to download the new driver to your GP/GLC. "Force Setup" is located
in the Transfer area's [Setup] menu. Click on the "Force Setup" checkbox
to select it. |
5. |
Driver
version confirmation:
You can check that the new driver has been
successfully downloaded to your GP/GLC
via the OFFLINE. Also, After sending the
new driver data, be sure
to deselect the Force Setup feature and reselect the standard "Auto
Setup" setting. |
|
Attention:
While viewing the property of the downloaded
update module, and selecting the "Version
Tab", the follwing error will be displayed:
"This program has performed an illegal operation and will be shut down."
We have confirmed this problem. Please do not view the "Version Tab" of
this updated module.
This problem will not effect the updated module which will correctly install
the updated files to your computer. |
Last Updated: September.11.2001 |
|