|
Driver Download |
使用我们的下载服务之前,请阅读以下使用条款。下载任何软件都表明您已同意这些条款。
使用条款
- Pro-face对此下载服务所提供的所有文件拥有知识产权。
- 您仅能以非赢利性目的、在您所属公司内部下载这些文件供个人使用。
- 严禁复制、公布、再出版、转让、出借、反编译、修改、伪造或再利用Pro-face为此下载服务提供的任何文件。
- 此下载服务通过互联网提供。在使用该项服务前,请明确Pro-face对下载时的状况、可访问性和与此项服务相关的使用情况不做任何担保。
- 使用此项服务的风险由您个人承担。
- 如果下载文件上有任何附加条款,如服务使用条款等,请务必遵守此类条款。
注意:
- 下载方法1:鼠标右键点击下载链接,选择“目标另存为...”。请不要使用下载软件进行下载。
- 下载方法2:部分文件通过百度云盘下载(需登录百度云盘),请按下载链接上红色字体的指示操作。
- 删除文件或对文件内容、规格等做出修改时恕不另行通知。
- 下载文件后,请确认其大小与显示的下载文件大小完全相符。
- 如果不相符,请勿解压(执行)此文件,而应将其删除,然后再重新下载一次。
|
Title |
CHINO Controller MODBUS Protocol |
File
Name |
CHINOMB.exe |
File
Size |
1,289KB |
Supported
Software |
GP-PRO/PB III for Windows Ver. 5.0 or later
Pro-Server with Pro-Studio Ver. 3.0 or later
* Installation is not required for GP-PRO/PB III C-Package02 Service Pack2(GP-PRO/PB III for Windows Ver. 6.3) or later users. |
Supported
Controller |
LT230 Series, LT300 Series, LT400 Series, JU Series |
Supported
Units |
- GP Series
GP377 Series, GP77R Series, GP2000 Series
- GLC Series
GLC2000 Series
- LT Series
- Factory Gateway |
PLC
Connection Manual |
For
details, please read the following PDF:
GP-PRO/PBIII for Windows Device/PLC Connection Manual |
|
Installation (The downloaded file is self-extracting.) |
Installation (The downloaded file is self-extracting.) |
1. |
Prio to installing the driver, close all your personal computer applications, including any resident program such as virus detection program, etc. |
2. |
Click on the above file name to download the data to desired folder. |
3. |
After the download to your PC is finished, double-click on the file's icon to start the installer program. |
4. |
After the installer starts, follow the instructions given on each screen.
The installer's default setup folder is for installing the driver to GP-PRO/PB III for Windows. |
5. |
After installation, when using GP-PRO/PB III for Windows Ver. 5.x, LT Editor or Pro-Server with Pro-Studio, select [CHINO CONTROLLER (MODBUS)] for the "PLC Type".
When using GP-PRO/PB III for Windows Ver. 6.0 or later, click on the Device/PLC area's [other] selection and select [CHINO CONTROLLER (MODBUS)].
* When using the driver, be sure to refer to the PLC Connection Manual PDF (Shown above). Also, for general information regarding PLC connection and documentation conventions please refer to your own Device/PLC Connection Manual. |
|
Last Updated: November.17.2003 |
|