PL Series
>PL-X930 Series >PL-X930 XP Embedded Service Pack2 Update
|
使用我们的下载服务之前，请阅读以下使用条款。下载任何软件都表明您已同意这些条款。
使用条款
- Pro-face对此下载服务所提供的所有文件拥有知识产权。
- 您仅能以非赢利性目的、在您所属公司内部下载这些文件供个人使用。
- 严禁复制、公布、再出版、转让、出借、反编译、修改、伪造或再利用Pro-face为此下载服务提供的任何文件。
- 此下载服务通过互联网提供。在使用该项服务前，请明确Pro-face对下载时的状况、可访问性和与此项服务相关的使用情况不做任何担保。
- 使用此项服务的风险由您个人承担。
- 如果下载文件上有任何附加条款，如服务使用条款等，请务必遵守此类条款。
注意：
- 下载方法1：鼠标右键点击下载链接，选择“目标另存为...”。请不要使用下载软件进行下载。
- 下载方法2：部分文件通过百度云盘下载(需登录百度云盘)，请按下载链接上红色字体的指示操作。
- 删除文件或对文件内容、规格等做出修改时恕不另行通知。
- 下载文件后，请确认其大小与显示的下载文件大小完全相符。
- 如果不相符，请勿解压(执行)此文件，而应将其删除，然后再重新下载一次。
|
Note:
- To use this update, the Enhanced Write Filter (hereafter described as "EWF") must be set to "Disable". After disabling the Write Filter with the EWFSettingTool, please restart your system before installing.
- Please close all applications before installing, including KeyClick.
| Title |
PL-X930 XP Embedded Service Pack2 Update |
| Version |
Due to this Installer, PLX930 version is upgraded.
- Ver1.00 → Ver3.00
- Ver2.00 → Ver3.00
|
| File Name |
PLX930_XPESP2Update_09032007.exe |
| File Size |
3,299KB |
| Supported OS |
- XP Embedded Service Pack2
|
| Supported Models |
- PLX930-XPE1G-J1-BLD
- PLX930-XPE1G-M1-BLD
|
| Updated Contents |
System Monitor version upgrade (V1.00 → V1.10)
The following issues were corrected:
- When some errors simultaneously occur to the monitoring items where "OS Restart" or "OS Shutdown" for the error actions is specified, the OS logs off.
- Deletion of the "Connecting" dialog to be displayed at the startup
- In the usage of System Monitor API, System Monitor service has to be stopped in some APIs.
EWFSettingTool version upgrade (V1.05 → V1.07)
The following setting was added:
- Addition of EWF status display onto the taskbar
The following issues were corrected:
- Change of GUI dialog
- Write filter function does not operate normally when a Proface CF card with
the "HB28B***C8*" marking on the lower right of the back is connected with PCMCIA I/F during SID creation (= "Change Security ID" is selected in "EWFSettingTool.exe").
Phenomenon
When starting "EWFSettingTool.exe", the following display appears.
When the error occurs before updating, take the steps as shown below:
* For this solution, you do not have to remove the CF card in PCMCIA I/F.
- Select [Start] R [Run] in this order.
- Enter "Rundll32 ewfdll.dll ConfigureEwf" and click [OK].
* When typing, upper case letters and lower case letters must be discriminated.
- Restart the panel computer.
- After the restart, Write Filter function is disabled. Install the update module.
Product version upgrade (V2.00 → V3.00)
The following settings were added:
- Addition of Backlight ON/OFF application (Disp.exe)
- Addition of Remote Shutdown Client application (RSCLT.exe)
→Please click.
|
| Limitations |
- Before update, confirm that the Writer Filter function is disabled. ("EWF Disable" must be selected in "EWFSettingTool.exe".)
- This update module cannot be uninstalled.
|
| Writer Filter Setting Procedure |
Refer to "3.1 Write Filter Settings Procedures" of the manual →Please click.( PDF:499KB ) |
Installation (This file is self-extracting.)
- Click "PLX930_XPESP2Update_09032007.exe" and download it to the folder you want.
- Double-click the downloaded file and start to install.
- According to the messages to be displayed on the window, continue the installation process until it completes.
- Restart the panel computer.
Last Updated : Sep. 12, 2007
|
